Acclimate Series Heat Pump
Acclimate™ Series heat pumps are ENERGY STAR® qualified models that offer at least 15% to 25% higher energy efficiency than standard models — plus, an innovative SilentDrive™ Comfort System for very silent operation.creates an operating cycle that works best for your locale.
- Most efficient heat pump at up to 18 SEER / 10 HSPF
- Efficient 2-stage compressor
- 2-5 ton capacity
- R-410A Refrigerant
- Communicating control capable
- SilentDrive™ comfort system
- Lifetime limited compressor warranty
- 10-year limited parts warranty*
Acclimate Series Heat Pump
Acclimate™ Series heat pumps are ENERGY STAR® qualified models that offer at least 15% to 25% higher energy efficiency than standard models — plus, an innovative SilentDrive™ Comfort System for very silent operation.creates an operating cycle that works best for your locale.
- Superior efficiency at up to 16 SEER / 9 HSPF
- Efficient scroll compressor
- 2-5 ton capacity
- R-410A Refrigerant
- Communicating control capable
- SilentDrive™ comfort system
- Lifetime limited compressor warranty
- 10-year limited parts warranty*
LX Series Heat Pump
LX Series heat pumps fit your needs while reducing your utility bills.
- Standard efficiency at up to 14 SEER / 8.2 HSPF
- Single-stage compressor
- 1.5-5 ton capacity
- R-410A Refrigerant
- Smaller condensing unit footprint
- 10-year limited compressor warranty
- 5-year limited parts warranty*
GETTING TO KNOW YOUR HEAT PUMP
Seer
SEER stands for the Seasonal Energy Efficiency Ratio and is the measure of efficiency by which the cooling process of air conditioner or heat pump systems are rated. The higher the SEER number, the greater the efficiency, and therefore the greater the energy savings. Today, U.S. regulatory agencies require all new products to have a 13.0 SEER rating or better.
HSPF
The term HSPF stands for Heating Seasonal Performance Factor and is the efficiency measurement used to gauge the efficiency of the heating mode of heat pumps. Again, the higher the number, the greater the efficiency. Today’s models are required to have a minimum 7.7 HSPF.
Variable-Speed
Unlike conventional single or two-stage motors, a variable-speed compressor runs at a wide range of speeds to precisely control the flow of heated and cooled air throughout your home. A variable-speed compressor is able to ramp up and down its performance in small increments in order to deliver maximum comfort and efficiency.
Two-Stage
Two-stage cooling means the air conditioner or heat pump has a compressor with two levels of operation: high for very warm climate and low for milder temperatures. Typically the low setting is adequate to meet household cooling demands 80% of the time. A compressor operating at the low setting will run for longer periods of time and produces consistent even temperatures throughout the day. Longer cooling cycles translate to quieter, more efficient operation.
Single-Stage
Single-stage cooling means that the air conditioner or heat pump has a compressor with a single level of operation. The compressor is either off or on depending on the cooling demands of the home.
A Portion of Your Luxaire® Equipment Purchase is Donated to
Make-A-Wish Foundation®
This season, that home comfort system you’ve been wishing for is now within reach. You’ll feel comfortable in so many ways from ideal indoor temperatures and lower utility bills thanks to our ENERGY STAR®-qualified Luxaire home comfort systems. And with part of your purchase supporting our sponsorship of the Make-A-Wish Foundation, we’ll deliver more than just the comfort you’ve been wishing for. So end your wishing and call us today!
